Holey Jeans, How to Repair Holes in Your Jeans – We knew it was coming today, but together we did many things and we faced a dilemma: should we replace or repair our favorite jeans? They are still in vogue, but this consumption area has become a hole and seems to grow every day. I can not stand it because my big leg is usually guilty and always wearing jeans when I wear them.
Fortunately, there is a way to store these jeans, and only glue and iron needed with glue. Today you are talking about creating a custom patch on your jeans, but we also have articles on how to prevent holes from developing if you hold holes. If you follow the instructions below, you can enjoy your favorite jeans for years.
Instructions for attaching holes to seamless denim jeans
This is a simple way to repair holes in jeans that require little skill and only use iron and sewing machines. If they are done according to instructions, these patches will give you more use of jeans. All sticky iron compounds are not the same. Most storage cabinets are designed for cotton and look good at first, but after a few wash and dry cycle, the songs begin to count. Use only trapper labels and find a company that guarantees your product. You will need the following materials:
Materials are required
1. Traper material suitable for jeans
2. The first iron-on denim denim
How to make holes in jeans
1. Start heating the iron for 3-5 minutes with the highest steam value
Find denim the same color as the jeans that make you fit. The piece must be half the length in all directions. Example 2 Hole “x2” requires 4 “x4” patches.
3. Take the glue and cut it to the same size as the patch, in this case 4 “x4”
4. Place the glue on the jeans that are facing you in the hole (your back or glue should point towards you) with your thumb in all directions.
Take Sharpie and draw the outline of the hole.
6. Cut the hole with glue
7. Front of the label in denim. Iron for about 20 seconds.
8. Cut the outer surface of the fabric so that the adhesive is at all edges of the patch. Add a small perimeter (without direct cuts) to prevent the fabric from appearing in front of the jeans.
9. Remove the jeans and place the fabric through the hole and align the edges of the joint.
10. Push the apron for 20 seconds on each side
11. Turn the jeans on (watch because the jeans are warm!) Push pressure on each page for 45 seconds and go! Learn more about creating a unique look at Rips Jeans, see other videos or other articles on these themes. This process works not only in jeans, but also in work trousers and shorts.